Floor Treatment Machines and Wet Scrubbing Machines are widely used in commercial buildings, hospitals, shopping malls, hotels, factories, airports and other facilities. These machines help clean, scrub, polish and maintain different types of floors. They are available in different designs, including electrically operated floor scrubbers and floor polishing machines.

As these machines use electricity and may operate with water or cleaning solutions, electrical safety is an important consideration. To ensure product safety and compliance with Indian regulations, the Government of India has included Floor Treatment Machines and Wet Scrubbing Machines under the Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2026.

Under this order, manufacturers and importers must obtain the applicable BIS certification and use the ISI Mark according to the prescribed implementation dates. The applicable general safety standard is IS 302 (Part 1): 2024, based on IEC 60335-1:2020.

What Is BIS Certification for Floor Treatment Machines and Wet Scrubbing Machines?

BIS Certification for Floor Treatment Machines and Wet Scrubbing Machines is a conformity assessment process that verifies whether the products meet the applicable Indian safety requirements. The Bureau of Indian Standards (BIS) grants certification after evaluating the manufacturer's production facilities, quality control arrangements and product test results.

The certification helps manufacturers demonstrate that their products comply with the relevant safety requirements. It is also a regulatory requirement for products covered by the Quality Control Order (QCO).

Manufacturers must identify the applicable requirements for their specific machine before applying. The product's design, electrical specifications and intended use may affect the applicable testing and certification requirements.

Is BIS Certification Mandatory for Floor Treatment Machines and Wet Scrubbing Machines?

Yes. BIS certification is mandatory for covered Floor Treatment Machines and Wet Scrubbing Machines under the Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2026.

The order specifies different implementation dates according to the size of the enterprise.

Manufacturers and importers should check their enterprise classification and the applicable provisions of the QCO. Products covered by the order must meet the requirements from the relevant implementation date.

BIS ISI Mark for Floor Treatment Machines and Wet Scrubbing Machines

The BIS ISI Mark indicates that a product has been certified under the applicable BIS product certification scheme. For covered floor treatment and wet scrubbing machines, manufacturers must obtain the required BIS licence before using the ISI Mark.

The certification process generally involves product testing, factory assessment and verification of quality control arrangements. Once the licence is granted, the manufacturer can use the ISI Mark on approved products according to BIS requirements.

The ISI Mark helps buyers identify products certified against the applicable Indian Standard. Manufacturers must ensure that the mark is used only on products covered by their valid BIS licence.

BIS Testing Requirements for Floor Treatment Machines and Wet Scrubbing Machines

Product testing is an important part of the BIS certification process. Floor Treatment Machines and Wet Scrubbing Machines must be evaluated against the applicable requirements of IS 302 (Part 1): 2024.

The testing process may cover several electrical and mechanical safety aspects, depending on the product design and applicable clauses.

Important testing areas include:

• Protection against electric shock: Checks whether users are adequately protected from dangerous electrical parts.

• Temperature rise: Evaluates whether the machine's components remain within permitted temperature limits during operation.

• Leakage current and electric strength: Checks electrical insulation and protection against electrical hazards.

• Moisture resistance: Evaluates the product's safety when exposed to moisture, where applicable.

• Abnormal operation: Checks the safety of the machine under specified abnormal operating conditions.

• Mechanical strength: Evaluates protection against relevant mechanical hazards.

• Marking and instructions: Checks whether required product information, safety warnings and operating instructions are provided.

The exact tests depend on the applicable standard, product construction and BIS testing requirements. Manufacturers should confirm the relevant test requirements before submitting samples to a BIS-recognised laboratory.

BIS Registration Process for Floor Treatment Machines and Wet Scrubbing Machines

Manufacturers must follow the applicable BIS Scheme-I (ISI Mark Scheme) to obtain certification. The general process includes the following steps:

1. Identify the applicable Indian Standard: Confirm that the product falls under the scope of IS 302 (Part 1): 2024 and the relevant QCO.

2. Prepare the required documents: Collect product specifications, manufacturing details, factory information, test reports and other documents required for the application.

3. Submit the BIS application: Apply through the BIS portal under the applicable product certification scheme.

4. Product testing: Submit product samples for testing at the appropriate BIS-recognised laboratory.

5. Factory inspection: BIS may inspect the manufacturing facility to assess production processes, testing facilities and quality control arrangements.

6. Grant of licence: After satisfactory evaluation of the application, test results and factory assessment, BIS may grant the licence to use the ISI Mark.

The actual process and documentation requirements may vary depending on the product and application.

Documents Required for BIS Certification

Manufacturers should prepare the necessary documents before applying for BIS certification. Commonly required documents include:

• Company registration certificate

• Manufacturing address and factory details

• Product technical specifications

• Manufacturing process flowchart

• Factory machinery details

• List of testing equipment

• Quality control documents

• Product labels and marking details

• Authorised signatory details

• Relevant test reports, where available

Additional documents may be required by BIS during application review or factory assessment.

BIS Product Manual for Floor Treatment Machines and Wet Scrubbing Machines

The BIS Product Manual provides guidance on the certification requirements and procedures for a particular product. It helps manufacturers understand the applicable standard, testing requirements, factory inspection and quality control arrangements.

For Floor Treatment Machines and Wet Scrubbing Machines, manufacturers should check the latest product-specific manual and applicable certification documents on the official BIS portal. The product manual, where available, should be read alongside IS 302 (Part 1): 2024 and the relevant QCO.

Manufacturers can use the

BIS Know Your Standard portal

to search for relevant standards and access available documents, including product manuals and amendments.

Role of a BIS Consultant for Floor Treatment Machines and Wet Scrubbing Machines

A BIS consultant can help manufacturers and importers understand the certification process and prepare for regulatory compliance. The process may involve technical documentation, product testing, factory inspection and communication with BIS.

A BIS ISI Mark Consultant can assist with:

• Identifying applicable Indian Standards and certification requirements.

• Preparing and reviewing BIS application documents.

• Coordinating product testing with suitable laboratories.

• Preparing manufacturers for factory inspections.

• Assisting with application queries and documentation corrections.

• Providing guidance on ISI Mark requirements.

EVTL India provides BIS certification consultancy services to manufacturers and importers. Its team can assist businesses with understanding the applicable requirements, preparing documentation and coordinating the certification process for covered products.

Conclusion

EVTL India is one of the leading BIS Consultant in India, helping manufacturers obtain their BIS licences hassle-free. BIS Certification for Floor Treatment Machines and Wet Scrubbing Machines is an important compliance requirement under the 2026 Quality Control Order. Manufacturers and importers should understand the applicable implementation dates, testing requirements and ISI Mark provisions before placing covered products on the Indian market.

Following the BIS certification process helps businesses meet regulatory requirements and demonstrate that their products comply with applicable safety standards. Manufacturers can consult EVTL India for assistance with documentation, product testing coordination and the BIS certification process.